1 | P a g e Key Largo Fire Pit Installation Instructions for Key largo with Stainless steel and SuperCast tops.
10 | P a g e Warranty: Fire pit tables are covered under a 1-year manufacturer’s warranty. Please visit http://www.outdoorrooms.com/warr
11 | P a g e
12 | P a g e © 2014 The Outdoor GreatRoom Company 2015 Silver Bell Road • Suite 195 • Eagan, MN 55122 Toll Free: 1-866-303-4028 • Sales@Out
2 | P a g e Contents Contents……………………………………………………..2 Required Tools…………………………………………..3 Placing and assembling the Table.……4 Gas Connection………………………
3 | P a g e Required Tools Utility Knife To cut and remove packaging 2 Open Ended Wrenches To make gas connections Leather Gloves To prote
4 | P a g e Placing and Assembling the Fire Pit table 1. Remove access door from packaging 2. Remove all components from packaging. 3. Move the base
5 | P a g e Gas Connection 1. Remove stainless steel top and lift burner out of base to expose control valve. 2. Connect the incoming gas hose t
6 | P a g e Igniter Installation 1. Make sure the valve is in the OFF position 2. Unscrew sparker cap and hex nut. Install as shown bel
7 | P a g e 3. To properly install ignition system, a spark and ground wire need to be attached to the igniter box. Start by pluggin
8 | P a g e Locating your Tank 1. Your tank should be positioned so that the fuel can be shut off after each use. 2. Slide the tank into the fram
9 | P a g e Finishing touches Once fire pit is set up and in the desired position, scatter decorative glass on burner surface forming an even layer
Commentaires sur ces manuels